Large capacity gypsum powder production line equipment

Gypsum Powder Making Line Equipment with High Capacity 1.Production line type 1)Controlling part:  Full Automatic2)Annual capacity: 20,000 t~300,000t3) Fuel: Natural gas, coal, diesel, heavy oil4)Raw material: Natural gypsum rock (if adding some equipments, industrial by-product--desulfurization gypsum can be used

Featured Products

Gypsum Powder Making Line Equipment with High Capacity
 
1.Production line type 
1)Controlling part:  Full Automatic
2)Annual capacity: 20,000 t~300,000t
3) Fuel: Natural gas, coal, diesel, heavy oil
4)Raw material: Natural gypsum rock (if adding some equipments, industrial by-product--desulfurization gypsum can be used), and in conformity with requirement of gypsum rock of over Grade 3 for making cementing material in JC/T 700-1998: Content of CaSO4·2H2O in raw material >70%.
 
2.Main Economical and Technical Parameter
NoNameUnitIndex
1Annual capacityMT30000
2Annual gypsum rock consumptionMT35000
3Working days/yearDay300
4Daily capacityMT100
5Electricity consumption for producing one ton of gypsum powder
 
KWH30
6Coal (7000 kcal/kg)Kg/t33
7Worker/shiftpersons/shift6-7
8Controlling Part Full Automatic
9Annual capacity 20, 000-200, 000 Tons Per Year
10Calcining system Ebullition furnace
Rotary kiln
Rotary kiln
11Fuel Natural gas, diesel, coal, heavy oil
12Raw material Natural Gypsum Rock
13Finished powder usage Gypsum board
Plaster wall/Putty 
 

3. Quality Standard:
Gypsum Powder Quality Standard: GB/T 9776-2008
Gypsum Powder: 80-100mesh
Composition: Content of β-CaSO4·1/2H2O (mass fraction) in calcined gypsum should be not less than 75%.
The Initial Setting Time: Shall Not Be Less Than 6 Minutes,
The Final Setting Time: Shall Not Be More Than 30 Minutes

4. Main Process
Gypsum Powder Plant(Nature Gypsum Rock)
Gypsum Mine -0-210mm gypsum rock→ Crushing →bucket elevator →silo → Raymond mill →screw conveyor → bucket  elevator →material stablization silo →electronic belt scale →bucket elevator →boiling kiln →bucket elevator →FU chain conveyor →clinker silo →packing
 
5.Main production equipment introduction
Grinding systemAutomatic measuring systemCalcining systemOrganic heat carrier boilerAging &packing systemAutomatic control system
among them,the Gypsum powder ebullition furnace used in the calcining system has following advantages:
a; Small volume, large capacity
b; Simple structure, un-damageable
c; Compact structure, less land occupation, good de-dusting effect
d; Less energy consumption
e; Convenient to operate, easy to control
f; Good product quality, relatively ideal calcined gypsum phase composition, stable physical properties
g; Low capital construction investment& operation cost
 
And the This furnace uses electric energy or chemical energy generated by solid, liquid or gaseous fuels as main heat source and heat conductive oil as heat transfer medium. It adopts pipeline to connect boiler and thermal equipment into closed system. It also adopts new saving type heating way--- adopting forced circulation to heat thermal equipment. Compared with other heating equipment, it has the following obvious advantages:
a; Under low working pressure, it can obtain higher heating temperature. As a result, equipment investment cost is reduced and safety factor is intensified.
b; Heat uniformly and stably, accurately control heating temperature to avoid part heating to heated product, effectively improving product quality.
c; The heat conductive oil has no corrosion and scale, so investment for water treatment equipment which is necessary for heat transfer medium such as water or steam and pharmaceutical treatment cost is reduced.
d; The freezing point of heat conductive oil is relatively low and can be used in cold winter. Even if it is solidified, there is no expansion and no danger for cracking equipment.
e; One organic heat carrier boiler can supply heat for several users simultaneously with different temperatures. Thus the equipment investment for many heating equipments for many users is reduced.
f; Compared with steam boiler, organic heat carrier furnace can save over 40% energy, for it adopts liquid transmission to transfer energy, and circulated heating, without condensation emission to loss heat. It is the ideal energy-saving and environment-protecting products, easy to operate, safe and reliable.

Gypsum Powder Making Line Equipment with High Capacity
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours