3D Printing Webinar and Event Roundup: August 7, 2022
3D Printing News Briefs, August 6, 2022: Business, Aerospace Accreditation, & More
3D Printing News Unpeeled, Live with Joris Peels Today
Metals Market Data: Q4 & Annual 2021
Market for Bound Metal Additive Manufacturing 2022
The Market for Additive Manufactured Polymer Automotive Parts: Europe and North America Regions
DED and Large-Format Additive Manufacturing Markets: 2021-2030
3D Printed Metals: A Patent Landscape Analysis 2019
3d Printed Polymers: A Patent Landscape Analysis – 2016
3d-printed Metals: A Patent Landscape Analysis – 2016
Metal Parts Produced 2021: Additive Manufacturing Applications Market Analysis
Additive Manufacturing with Metal Powders 2020
Copper Additive Manufacturing 2020–Market Database and Outlook
Surface Finish Study by Fraunhofer IAPT
Additive Monitoring Study by Fraunhofer IAPT
Additive Fatigue Study by Fraunhofer IAPT
A curated collection of industry and product deep-dives.
Videos, podcasts, product reviews and free downloadable resources.
Powerful search with product databases and business directories.
Dig Deeper, Search Our Message Board 3dprintboard.com
Feature Your Job Posting Here
3D Printing Webinar and Event Roundup: August 7, 2022
3D Printing News Briefs, August 6, 2022: Business, Aerospace Accreditation, & More
3D Printing News Unpeeled, Live with Joris Peels Today
3D Printing Webinar and Event Roundup: August 7, 2022
3D Printing News Briefs, August 6, 2022: Business, Aerospace Accreditation, & More
3D Printing News Unpeeled, Live with Joris Peels Today
Over the last two years, Metallum3D has been developing a new type of microwave heating process that uses non-resonant, cross-polarized slotted waveguides and a granular susceptor material to evenly distribute microwave energy during processing. Until now, microwave energy has not been successfully used in additive manufacturing applications due to the uneven microwave energy distributions of the current multi-mode resonant technology. Recently, Metallum3D completed the construction of a second-generation microwave furnace that implements non-resonant, cross-polarized slotted waveguides as a microwave energy feeding system. A picture of the microwave furnace is shown below in Figure 1.
The performance of the non-resonant, cross-polarized slotted waveguides used in this microwave furnace has been simulated using the electromagnetic simulation software CST Microwave Studio. The simulations showed that the non-resonant, cross-polarized waveguides generate an electric field with uniform microwave energy distribution. Figure 2 shows a 3D CAD model of the non-resonant, cross-polarized waveguide pair and a simulation of the electric field being generated in free space. The uniform color distribution within the electric field cross-section is indicative of uniform microwave energy distribution.
A separate simulation was conducted to evaluate the performance of the non-resonant, cross-polarized slotted waveguides as mounted in the microwave cavity. Figure 3 shows the simulation of the electric field generated by the non-resonant, cross-polarized waveguides at the mid-section of the microwave cavity. The uniform color distribution within the electric field cross-section is indicative of uniform microwave energy distribution.
A recent validation study completed by Metallum3D utilized cast gypsum plates saturated in a cobalt chloride solution and thermal imaging to map the actual microwave energy distribution of the non-resonant, cross-polarized waveguides under operating conditions. After exposing the plates to a microwave field, the heating of the plates causes a color change in the cobalt chloride that forms a color map of the microwave energy distribution. The visual color map results were cross-validated with thermal imaging.
The Metallum3D microwave furnace uses two sets of waveguides, with each waveguide being directly fed by 1.5 kW magnetrons for a total of 6kW. Figure 4 shows the internal and external waveguide arrangement.
For validation testing, 6 casted plates were vertically loaded into the microwave with the aid of a PVC fixture as shown in Figure 5.
Microwave heating of the plates resulted in a uniform color change of all the plate surfaces from a pinkish-grey color to a bluish-gray color. There was no color banding in any of the plate surfaces indicating homogenous microwave heating throughout the entire microwave cavity volume. The visual results obtained were then cross-validated through thermal imaging, which also showed uniform microwave heating throughout the surfaces of all the plates. The actual microwave energy distribution of the non-resonant, cross-polarized slotted waveguides is in good agreement with the predicted microwave energy distribution previously obtained through electromagnetic simulation. A technical white paper detailing the validation testing and results is available for download at the following link:
Metallum3D Technical White Paper Download
The successful validation of this new type of microwave heating process by Metallum3D is creating new opportunities for processing additively manufactured parts. Our Microwave Furnace is configured for both microwave sintering and microwave digital casting. For microwave sintering, parts are embedded in a granular susceptor material within a microwave transparent and thermally insulating box for rapid microwave sintering, which is up to 90% faster than conventional sintering. A schematic representation of the Metallum3D microwave sintering process is shown in Figure 6.
Microwave Digital Casting is a process that combines additive manufacturing and microwave heating to create a new agile and cost-effective casting process that bypasses the need to pour molten metal into a mold. The first step in the microwave digital casting process is to 3D print a sacrificial ceramic shell mold. The second step is to fill the ceramic shell mold with a metal powder and embed it in our granular susceptor material. The third step is to place the embedded mold in our microwave furnace to melt the metal powder within the mold to form a cast part. Figure 7 shows the basic steps of the Metallum3D Microwave Digital Casting process.
As a result of the successful validation of our new microwave heating process, Metallum3D in conjunction with P3 Additive is launching a Beta Customer Program. Under this program, we are looking to identify 10 customers that have applications that could benefit from implementing our Microwave Sintering or Microwave Digital Casting process. Use the link below to apply to the Beta Customer Program.
Metallum3D Beta Customer Program
Stay up-to-date on all the latest news from the 3D printing industry and recieve information and offers from thrid party vendors.
3D Printing Webinar and Event Roundup: August 7, 2022
3D Printing News Briefs, August 6, 2022: Business, Aerospace Accreditation, & More
Bosch has bought two SLM500 powder bed fusion (PBF) metal 3D printers from SLM Solutions. One will be used at the company’s 3D-MPC Manufacturing and Processing Center to make powertrain...
Researchers at Rutgers University have developed a technique they called “multiplexed fused filament fabrication (MF3)“. MF3 sees multiple nozzles mounted onto a single gantry that moves while the build platform...
Kicking things off in today’s 3D Printing News Briefs is a story focused on aviation, as two 3D printed cargo links represent the first U.S. Army-developed metallic 3D printed aircraft...
To help address the additive manufacturing (AM) skills gap that exists between technological progress and a talented workforce, the European Union funded the THREE-D-Print project. The group will be presenting...
Upload your 3D Models and get them printed quickly and efficiently.
Networking & Intelligence Summit, February 7-9, 2023
3D Printing jobs around the world.
Subscribe to Our Email Newsletter
© 2016 - 2022 3DR HOLDINGS. ALL RIGHTS RESERVED.
Register to view and download proprietary industry data from SmarTech and 3DPrint.com Questions? Contact info@3dprint.com